Straighteners Series RS

Straightening Roll Diameter 80 mm



Straighteners of series "RS" with straightening roll diameter 80 mm and closed straightening head, depending on numbers of straightening rolls and entry pinch rolls as well as exit pinch rolls, are divided into the series "RSC", "RSA", "RSB" and "RSD". 
 

Straighteners of series RSC, RSA, RSB and RSD in standard version are available with

  • Straightening roll diameter 80 mm
  • Single adjustment of upper straightening rolls with indication of immersion depth
  • Manual adjustment of the entry pinch rolls resp. entry- and exit pinch rolls
  • Constant-speed drive 18 meters / minute
  • Loop control by supporting stand with switches for upper and lower limit
  • Rolls hardened and grinded, 58 + 1 HRC
  • Roughness of the rolls 0,2 micron
  • Max material widths of 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm
  • Max material thicknesses of 4,5 - 2,8 mm, depending on material width and without
    support rolls


Example of rolls configuration of the single series:

  • RSC/7          2 entry pinch rolls + 5 straightening rolls
  • RSA/9          2 entry pinch rolls + 7 straightening rolls
  • RSB/9          2 entry pinch rolls + 5 straightening rolls + 2 exit pinch rolls
  • RSD/11       2 entry pinch rolls + 7 straightening rolls + 2 exit pinch rolls
     

 As options for these straighteners there are accessories available, like for example:

  • Control of the decoiler at the entry side by initiator
  • Variable pneumatic adjustment of entry- and exit pinch rolls
  • Variable speed drive controlled by frequency converter with loop control by 
    lever arm, powered with 1,5, 2,2 or 3,0 kW
  • Loop control by ultrasonic sensor
  • Pneumatically resp. hydraulically operated material entrance table with 2, 4 or
    6 moving functions
  • Loop bridge, up to 4 meter
  • Common base for straightener and decoiler

At the area on the right side you will find a list of standard straighteners out of the series described above, including the technical data of the single models. If you will not find there the suitable model or if you will have wishes deviating from the listed specifications, please do contact us.

Please inform us about your requirement regarding the straightener searched by you. Basin on the base machines listed on this page as well as optional accessories we will configurate your individual straightener. We are prepared to check and realise any further adaptation of the straightener which may be needed.

Please contact us by phone or email.

Tel.: 0049 2156 419193
Fax: 0049 2156 4979325
eMail: info@seidel-handlingsysteme.de

Plastic Injection Moulds Manipulators indoor_universal_transport_cart_type 1 Coilverarbeitung servo feeder straighteners RSDE80 Werkzeughandling heavy load pallet truck type 1 large sized_decoilers_with_constant_speed_drive high lift coil transport carts with carrying bolt and change prism pedestrian_transport_solutions_PTT3_with_pivot_bearing pedestrian_transport_solution Werkzeughandling indoor heavy load pallet transport carts type 2 roller_feeds